Neoteric Hovercraft Model 7600
Price:Contact for price
*For US and Canada customers only.
Included:
- 65HP Carbureted Engine
- Reverse Thrust System
- Full Instrumentation
- Including Trailer and Spare Wheel
Featuring composite urethane foam and hand-laid fiberglass hull.
BRIEF SPECIFICATIONS
Payload
4 persons, 600 lb (272 kg) average. 750 lb (340 kg) max. Gross overload 7 persons, 1200lb (545 kg).
Forward Speed
35 mph (56 km/hr) maximum recommended cruise.
30-40 mph (48 to 64 km/hr) land, short grass.
30-45 mph (48 to 72 km/hr) mudflat, beach.
30-45 mph (48-72 km/hr) firm snow.
45 mph (72 km/hr) calm water.
40-50 mph (64-80 km/hr) smooth ice.
30-40 mph (48 to 64 km/hr) land, short grass.
30-45 mph (48 to 72 km/hr) mudflat, beach.
30-45 mph (48-72 km/hr) firm snow.
45 mph (72 km/hr) calm water.
40-50 mph (64-80 km/hr) smooth ice.
Reverse Speed
25 mph (40 km/hr) calm water.
Hump
6 sec, to reach 5 mph (9.7 km/hr) over calm water, with 400 lb (181 kg) payload.
Range-Endurance
81 miles (130 km), 3.25 hours on single tank(13 Gallon).
Static Thrust
140 lb (64 kg) 55 hp engine
160 lb (73 kg) 65 hp engine
160 lb (73 kg) 65 hp engine
Engine
Hirth model 3203, 625 cc, 65 hp (49 kw) @ 6300 rpm
2 cycle, two cylinder in line, fan cooled, Single CDI (Capacitive discharge Ignition),
Carbureted engine, electric and manual start, aluminum engine, weight 82 lb (37.3 kg). Spark plug, gap .020-.024 in. Maximum cylinder head temperature at spark plug 535° F (277°C), EGT 1230° F (665° C) .
Transmission 31-tooth and 72-tooth hard anodized aluminum HTD sprockets on engine and fan shaft, joined by Carbon Fiber HTD belt. Fan shaft bearings – 1 in (25.4 mm) bore pillow block Sealmaster and 1 in (25.4 mm) Asahi.
Fuel Consumption
3.5 US gal/hr (13.3 l/hr) at cruising power.
