Home News About Hovercraft About Neoteric Products and Prices Hover Garage NeoTechnology Forum Contact
 
The Hovercraft Principle: How does a hovercraft work?


A hovercraft is an amphibious vehicle that is supported by a cushion of slightly pressurized air. Although often seen as a mysterious, even bizarre mode of transportation, it is conceptually quite simple. To understand how hovercraft work, it is necessary to realize that the dynamics are more closely related to aircraft than to boats or automobiles. As a member of the family of air cushion vehicles (ACVs) or ground effect machines, which includes wing-in-ground-effect or ram wings, surface effect ships, sidewall hovercraft, and surface skimmers, hovercraft, are the amphibious member of the air cushion vehicle family. They are the most novel among vehicles that are supported by pressurized air. Refer to the illustration below as you read about how hovercraft actually function.

Hovercraft float on a cushion of air that has been forced under the craft by a fan. This causes the craft to rise or lift. The amount of lift can range from 6" to 108" (152mm to 2,743mm) depending on the size of the craft. The amount of total weight that a hovercraft can raise is equal to cushion pressure multiplied by the area of the hovercraft. To make the craft function more efficiently, it is essential to limit the cushion air from escaping, so the air is contained by the use of what is called a skirt. Fashioned from fabric, which allows a deep cushion or clearance of obstacles, hovercraft skirts vary in style ranging from bags to cells (jupes) to separate fingered sections called segments. Most Neoteric hovercraft utilize the segmented skirt system because each segment can deflect individually when passing over bumps so that very little lift air is lost on uneven terrain.

Once "lifted" or "on cushion", thrust must be created to move the hovercraft forward. With many craft, this is generated by a separate engine from the one used to create the lift, but with some, the same engine is used for both. As the diagram above indicates, the fan-generated air stream is split so that part of the air is directed under the hull for lift, while most of it is used for thrust.

Now that the hovercraft has lift and thrust, it must be steered safely. This is achieved through the use of a system of rudders behind the fan, controlled by handlebars up front. Steering can also be controlled by the use of body weight displacement...a skill which is achieved after practice. As an option, Neoteric hovercraft offer patented, reverse thrust buckets as another means of control. This is the only system available today that enables the driver to reverse at speed, to maintain cushion at speed, to regulate speed going downwind, to hover while stationary and to brake (a must on ice).

Neoteric Hovercraft, Inc.
1649 Tippecanoe Street Terre Haute, Indiana USA 47807-2394
Telephone: 1-812-234-1120 / 1-800-285-3761 Fax: 877-640-8507

Homepage:
www.neoterichovercraft.com / www.rescuehovercraft.com
E-mail: hovermail@neoterichovercraft.com
© 2003 Neoteric Hovercraft, Inc
All rights reserved. Unauthorized use of any content on this website is illegal.
Criminal copyright infringement, including infringement without monetary gain,
is investigated by the United States FBI and is punishable by up to
5 years in U.S. federal prison and a fine of US $250,000